03 February, 2013

Tools of the Trade - February


February sees Creamore Mill take their place as the stars of our Tools of the Trade Calendar. Established in 1981 in rural Shropshire, this family-run business designs and hand-turns all of their wooden products in the former corn and wood mill which gave its name to their business. From their extensive range of functional and practical household and garden items we have selected the Wooden Door Wedge, Twine Stand and Dibber.

Sam Buckland, son of business founders John and Cathryn Buckland, kindly gave us an explanation of each of the tools pictured:

“The goggles should be self explanatory, especially so when you see the direction in which the shavings generally leave the cutting tools while turning wood.”


“The gouge is a versatile turning chisel, used for both rough turning of blanks from a square down to the finishing cut. The long handle provides good leverage to control the angle of attack. An example of use is turning the bishop twine stand bases – square blanks are band sawed into discs and then mounted on a lathe. The gouge makes the straight roughing cut at the circumference, a finishing smooth cut and the adjacent bevel profiles.”


“Our hand chisels are made in Sheffield from high speed steel; an excellent balance between edge sharpness and durability for wood turning.”


“The roll of sand paper is one of several with different grits, of graduating coarseness. While the work piece is still turning on the lathe the sand paper is used to smooth the final profile, knocking off the wood fibres from the end grain and corners. Sand paper also introduces a more uniform surface in preparation for certain finishes.”


“The bronze brush is used in general tool cleaning. The release of wood resins during working can leave a build-up of grime on the tools. The softer bronze bristles avoid damage to the cutting edges.”


With three decades of experience and a simple collections of tools, Creamore Mills are justifiably proud of their artisan approach. Our thanks go to them for allowing us to photograph their tools, and for Sam’s explanation of their use.

  • See more: 2013, Calendar, Tools of the Trade

  • Archive: